Showing all 13 results
We designed these for scuba diving and anti-wind chill.
You can see the seal around the face is neoprene, for the nice firm seal to prevent water ingress. The rest of the hood is trilaminate that is easy to put on and take off.
You’ll also note the beard on the hood is quite low. It sits under thewetsuit, designed to tuck in and seal within the neck so that it prevents water ingress when scuba diving. You can wear it to keep warm in colder temps because of the membrane in the trilaminate, cutting wind chill.
One of the biggest features is the membrane because it blocks out wind even when you’re wet.
Some customers use it for fishing on the jetties because of the anti-wind chill factor. What we offer is an affordable layering garment that eliminates that wind chill.
In a rough winter with wind and rain you can wear the hood and get out of the wind.
Our 3mm and 5mm hoods have a simple minimalist design with a smooth Glideskin interior and are produced using stretch neoprene to ensure a comfortable fit. The short collar works for both dry and wet suits, and micro holes in hood vent air with minimal water ingress.
This is a lot more than just a sock. It is a sock that utilizes our trilaminate material, so it’s super comfy. It’s one of our most popular items bc when you put it on you realize just how comfortable it is. Some of our staff wear these socks to keep warm in winter.
It’s a sock that’s used for water sports so it’s not an everyday sock. It can be used under a neoprene boot? Or on its own. You can see that at the top it has a neoprene seal that won’t allow water inside the sock.
They are warm, andstylish. The branding underneath is not just a branding feature but also functional as tread. It adds a Nordstrom’s feel. Watersports has a lot of slick surfaces, so the additional tread grip helps.
It took a couple of iterations to find the right design. We were already using our trilaminate material, so it was just getting the fit right.
What took the most time was getting the cuts right. The important part is getting the heel right. Getting the seam above the heel assured us that no pressure was on that seam, so no damage could occur.
Most sock patterns are just two pieces of flat material sewn together. We used a pattern to conform to the shape of the foot, then another to conform to the Achilles heel. We put a lot of effort into getting that right. We knew it was right, when the staff started asking if they could wear them around the office.
Doesn’t look like it has neoprene seams on it
Kayaking and Stand up Paddle Boarding require ultimate freedom of movement. We worked a lot on the fit, went through 5 or 6 pattern adjustments. We see this garment as a performance type garment. We want it snug so it functions well. We’re very happy with how it performs. The Meridian Vest works great as an underlay, even better than neoprene. It’s standalone or layering garment.
Great looking seams, design efforts, doesn’t go straight across. Has a drawstring, another feature great for active watersports, because garments tend to ride up. So if you’re fully wet, you want the garment to be stable and firm in one position. The drawstring placements outside are what holds it in place. Keeping that warmth in there and controlling your core temperature.
Equally as effective as a layered undergarment garment, or used sand alone, the Meridian Vest keeps your core warmer for longer. Designed using Enth Degrees 385gsm Fernotherm3 material, the Meridian is designed to offer you thermal protection where it matters most, whist not effecting freedom of movement in anyway. Neat features like the hidden Utility Pocket, Quick-adjust waist system and board short connection loop provide functionality and flexibility along with thermal performance.
The Tundra in its development has been taken through its paces by test pilots across a range of sports; resulting in the best piece of multisport gear perfect for applications such as Kayak clothing, SUP clothing, Kite Surfing tops and Dive Wetsuits. The Tundra’s performance comes from its material and design. The Anti-wind chill the of 385gsm Fernotherm3, makes it perfect for above water paddle sport and soft touch internal lining beats all competitors when worn below the water in sports such as Scuba Diving and Snorkeling. Form cut performance design and the unique ‘silver back” aesthetics encapsulate the high tech performance capabilities of this unique top.
The Aveiro Shorts bring a new level of comfort to thermal protection of the lower body. The Core panels of the garments utilizes Enth Degrees 385gsm Fernotherm3 material, offering supreme comfort, flexibility and water resistance, whist maintaining breathability to avoid overheating. A hidden utility pocket, non-slip neoprene waistband both add to the uniqueness of this multi-use garment.
Carefully designed with high-intensity watersports in mind the Bombora LS is a Long Sleeve top that utilizes the unique 240gsm Activflex material. The design focus ensures the garment conforms to the body, whilst still maintaining an unrestricted range of movement. The breathable nature of the Activflex avoids overheating, whilst the brushed internal lining provides superior softness and anti-chaffing characteristics against the skin. Low profile flat-lock joining of the ergonomically designed active panels keeps the garment firmly in place through all levels of intense activity
The Assana with its sleek feminine lines was brought to life by a demand for new innovation in womens SUP clothing and watersports wear. Designed to be used stand alone or coupled with a pant or short, the Assana forms part of Enth Degree’s Fernotherm3 Series of women’s active wear purpose built for water sports. The Anti-wind chill the of 385gsm Fernotherm3, makes it perfect for above water sports such as SUP, Surf and Kite and the internal membrane traps water against the body when worn below the water in sports such as Scuba Diving and Snorkeling keeping users warmer for longer, similar in its thermal properties to a 2mm Neoprene.